English
Language : 

V23848-M305-C56 Datasheet, PDF (11/30 Pages) Infineon Technologies AG – iSFP-Intelligent Small Form-factor Pluggable 1.25 Gigabit Ethernet 2.125/1.0625 Gbit/s Fibre Channel Multimode 850 nm Transceiver with LC Connector
V23848-M305-C56
Technical Data
4) Internally AC coupled. Load 50 Ω to GND or 100 Ω differential. For dynamic measurement a tolerance of
50 mV should be added.
5) Fibre Channel PI Standard.
6) Measured values are 20% - 80%.
7) Deterministic Jitter is that jitter measured by a bathtub scan, using a 27–1 NRZ PRBS, and extrapolating to
1 BER.
8) Total Jitter is that jitter measured by a bathtub scan, using a 27–1 NRZ PRBS, and extrapolating to 1x10–12 BER.
Receiver total jitter complies with Fibre Channel jitter output budget for OMAs from the stressed receiver
sensitivity limit up to at least 700 µW. Error-free operation at the center of the eye is achieved for OMAs up to
at least 1000 µW.
9) Jitter (pk-pk) is measured using a 27–1 NRZ PRBS and a Digital Communications Analyzer.
10) Measured using a 20 Hz to 1 MHz sinusoidal modulation with the MSA recommended power supply filter
network (Figure 7) in place. A change in sensitivity of less than 1 dB can be typically expected.
11) Supply current excluding Rx output load.
Data Sheet
11
2004-06-23