TLI4946 Datasheet, PDF (11/17 Pages) Infineon Technologies AG – High Precision Hall Effect Latches for Industrial and Consumer Applications

3
Specification
3.1
Application circuit
TLI4946
Specification
Q
Q
GND
GND
V_S
200Ω
V_S
Figure 5 Application circuit
It is recommended to use a resistor of 200 Ω in the supply line for current limitation in the case of an overvoltage
pulse. Two capacitors of 4.7 nF enhance the EMC performance. The pull-up of 1.2 kΩ limits the current through
the output transistor.
3.2
Absolute Maximum Ratings
Stress above the maximum values listed in this section may cause permanent damage to the device. Exposure to
absolute maximum rating conditions for extended periods may affect the reliability of the device. Exceeding only
one of these values may cause irreversible damage to the device.
Table 3 Absolute Maximum Ratings
Parameter
Symbol
Maximum Ambient Temperature T_A
Maximum Junction Temperature T_J
Supply Voltage
V_S
Supply current through protection I_S
device
Output Voltage
Storage Temperature
Magnetic flux density
V_OUT
T_S
B
ESD Robustness HBM:
1.5 kΩ, 100 pF
V 1)
ESD,HBM
1) According to EIA/JESD22-A114-E
Min.
- 40
- 40
- 18
-50
- 0.7
- 40
–
–
Values
Typ. Max.
–
125
–
150
–
18
–
50
–
18
–
150
–
unlimited
–
4
Unit
°C
°C
V
mA
V
°C
mT
kV
Note / Test Condition
Datasheet
11
Rev. 1.0, 2009-05-04