SAA-XC866 Datasheet, PDF (102/114 Pages) Infineon Technologies AG – 8-Bit Single-Chip Microcontroller

SAA-XC866
4.2.4 Power Supply Current
Electrical Parameters
Table 37 Power Supply Current Parameters (Operating Conditions apply)
Parameter
Active Mode
Idle Mode
Active Mode with slow-down
enabled
Idle Mode with slow-down
enabled
Symbol
I_DDP
I_DDP
I_DDP
Limit Values
typ.¹⁾ max.²⁾
22.6 24.5
17.2 19.7
7.2
8.2
Unit
mA
mA
mA
Test Condition
3)
4)
5)
I_DDP
7.1
8
mA ⁶⁾
1) _{The typical IDDP values are periodically measured at TA = + 25 °C and VDDP = 5.0 V.}
2) _{The maximum IDDP values are measured under worst case conditions (TA = + 140 °C and VDDP = 5.5 V).}
3) _{IDDP (active mode) is measured with: CPU clock and input clock to all peripherals running at 26.7 MHz(set by}
on-chip oscillator of 10 MHz and NDIV in PLL_CON to 0010_B), RESET = V_DDP.
4) _{IDDP (idle mode) is measured with: CPU clock disabled, watchdog timer disabled, input clock to all peripherals}
enabled and running at 26.7 MHz, RESET = V_DDP.
5) _{IDDP (active mode with slow-down mode) is measured with: CPU clock and input clock to all peripherals}
running at 833 KHz by setting CLKREL in CMCON to 0101_B, RESET = V_DDP.
6) _{IDDP (idle mode with slow-down mode) is measured with: CPU clock disabled, watchdog timer disabled, input}
clock to all peripherals enabled and running at 833 KHz by setting CLKREL in CMCON to 0101_B,
RESET = V_DDP.
Data Sheet
99
V1.5, 2010-09