English
Language : 

TLE6284G_08 Datasheet, PDF (1/17 Pages) Infineon Technologies AG – H-Bridge Driver IC
Data Sheet TLE6284G
H-Bridge Driver IC
Features
Product Summary
• Compatible to very low ohmic normal Turn on current
level input N-Channel MOSFETs
• PWM – DIR - Interface
• PWM frequency up to 50kHz
• Operates down to 7.5 V
supply voltage
Turn off current
Supply voltage range
Gate Voltage
Temperature range
• Low EMC sensitivity and emission
• Adjustable dead time with shoot through protection
• Deactivation of dead time and shoot through protection possible
• Short circuit protection for each Mosfet can be disabled and adjusted
• Driver undervoltage shut down
• Reverse polarity protection for the driver IC
• Fast disable function / Inhibit for low quiescent current
• Input with TTL characteristics
• 2 bit diagnosis
• Thermal overload warning for driver IC
• Shoot through protection
• Integrated bootstrap diodes
• Green Product (RoHS compliant)
• AEC Qualified
IGxx(on)
IGxx(off)
VVs
VGS
TJ
850 mA
580 mA
7.5 … 60
V
10
V
-40...+150 °C
PG-DSO-20
Marking
TLE6284G
Application
• Dedicated for DC-brush high current motor bridges in PWM control mode for 12, 24 and 42V powernet applica-
tions.
• The input structure allows an easy control of a DC-brush motor
General Description
H-bridge driver IC for MOSFET power stages with multiple protection functions. The TLE6184G is very similar to
the TLE6281G. The major difference is that the Short Circuit protection level of the TLE6284G can be adjusted
by external resistors or even disabled. The pin outs are different as well.
Block Diagram
VS
GND
INH
Linear
Regulator
INH
Charge Pump
PWM
DIR
DT/DIS
HS1
Input control
LS1
HS2
Dead time
LS2
Level
ER1
ER2
Undervoltage
Short circuit Detect.
Overtemp. warning
Undervoltage HSx
OR Undervoltage LSx
Short Circuit Detection
Tj > 170oC typ.
Shift
Data Sheet
1
BH1
BH2
Floating HS Driver 1
+
VGS limitation HS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating HS Driver 2
+
VGS limitation HS2
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 1
+
VGS limitation LS1
+
Short circuit
detect.
SCD
+
Undervoltage
Floating LS Driver 2
+
VGS limitation LS2
+
Short circuit
detect.
SCD
+
Undervoltage
DH1
GH1
SH1
DH2
GH2
SH2
DL1
GL1
DL2
GL2
Rev 2.4 2008-03-18