TLE5206-2_07 Datasheet, PDF (1/24 Pages) Infineon Technologies AG – 5-A H-Bridge for DC-Motor Applications

5-A H-Bridge for DC-Motor Applications
TLE 5206-2
1
Overview
1.1 Features
• Delivers up to 5 A continuous 6 A peak current
• Optimized for DC motor management applications
• Operates at supply voltages up to 40 V
• Very low R_{DS ON}; typ. 200 mΩ @ 25 °C per switch
• Output full short circuit protected
• Overtemperature protection with hysteresis
and diagnosis
• Short circuit diagnosis with open drain error flag
• Undervoltage lockout
• CMOS/TTL compatible inputs with hysteresis
• No crossover current
• Internal freewheeling diodes
• Wide temperature range; − 40 °C < T_j < 150 °C
• Green Product (RoHS compliant)
• AEC Qualified
PG-TO220-7-11
PG-DSO-20-37
Type
TLE 5206-2
TLE 5206-2GP
TLE 5206-2G
TLE 5206-2S
Package
PG-TO220-7-11
PG-DSO-20-37
PG-TO263-7-1
PG-TO220-7-12
PG-TO263-7-1
Description
PG-TO220-7-12
The TLE 5206-2 is an integrated power H-bridge with DMOS output stages for driving
DC-Motors. The part is built using the Infineon multi-technology process SPT^® which
allows bipolar and CMOS control circuitry plus DMOS power devices to exist on the
same monolithic structure.
Operation modes forward (cw), reverse (ccw), brake high and brake low are invoked
from just two control pins with TTL/CMOS compatible levels. The combination of an
extremely low R_{DS ON} and the use of a power IC package with low thermal resistance and
high thermal capacity helps to minimize system power dissipation. A blocking capacitor
at the supply voltage is the only external circuitry due to the integrated freewheeling
diodes.
Data Sheet
1
Rev.1.1, 2007-07-31