|
TLE4208G Datasheet, PDF (1/16 Pages) Infineon Technologies AG – 1-A Quad-HBD (Quad-Half-Bridge Driver) | |||
|
1-A Quad-HBD (Quad-Half-Bridge Driver)
TLE4208G
Overview
Features
⢠Driver for up to 3 motors
⢠Delivers up to 0.8 A continuous
⢠Optimized for DC motor management applications
⢠Very low current consumption in stand-by (Inhibit)
mode
⢠Low saturation voltage; typ.1.2 V total @ 25 °C; 0.4 A
⢠Output protected against short circuit
PG-DSO-28-24
⢠Error flag diagnosis
⢠Overvoltage lockout and diagnosis
⢠Undervoltage lockout
⢠CMOS/TTL compatible inputs with hysteresis
⢠No crossover current
⢠Internal clamp diodes
⢠Overtemperature protection with hysteresis and
diagnosis
⢠Enhanced power DSO-Package
⢠Green Product (RoHS compliant)
⢠AEC Qualified
Type
TLE4208G
Ordering Code
on request
Package
PG-DSO-28-24
Description
The TLE4208G is a protected Quad-Half-Bridge-Driver designed specially for
automotive and industrial motion control applications.
The part is built using Infineons bipolar high voltage power technology DOPL.
In a cascade configuration up to three actuators (DC motors) can be connected between
the four half-bridges. These four half-bridges are configured as 2 dual-half-bridges,
which are supplied and controlled separately. Operation modes forward (cw), reverse
(ccw), brake and high impedance are invoked from a standard interface.
The standard enhanced power PG-DSO-28-24 package meets the application
requirements and saves PCB-board space and costs. Moreover the package is RoHS
compliant.
Data Sheet
1
2008-02-04
|
▷ |