English
Language : 

PXF4225E Datasheet, PDF (1/2 Pages) Infineon Technologies AG – ATM Interworking Controller
PRODUCT BRIEF
Infineon’s IWORX controller is a multi-service
engine for wireless access network and media
gateway linecards. Designed to transport ATM traffic
over PDH and SDH based networks, IWORX enables
the adaptation of voice, video and data traffic via
AAL2 at speeds up to 155 Mbit/s.
Shared location of 2G and 3G mobile networks for
easy network migration path is facilitated via AAL1
and Circuit Emulation Service (CES). The IWORX
controller also provides flexible PDH port bandwidth
adjustment through four IMA groups, and imple-
ments all ATM service categories (CBR, VBR, UBR)
for full Quality of Service (QoS) support.
Infineon’s IWORX system on a chip with integrated
memory and high-level API command interface is
also easy to use, making it the most optimized
solution in terms of performance, small BOM and
power economy.
Applications
IWORX
G.804, OAM, IMA and traffic
I Mux/demux of up to 255 AAL2
I 3G base transceiver stations
management
channels per AAL2 ATM VCC
(Node B) and radio network
I Highly integrated IC reduces
I AAL5 support according to ITU-T
controller (RNC)
power requirements, BOM and
I.363-5
I Multiservice Linecards
I Multimedia Gateways
Features
I Throughput up to 155 Mbit/s
I On-chip CPU for simple protocol
handling and control
I Easy to configure with
maintenance and in-band
communication via message
based interface
I Embedded Memory
I Port specific mode selection
I Time slot specific protocol
selection such as AAL1 and
G.804
I Dedicated hardware modules for
fast and reliable performance
intensive communication
functions such as AAL1, AAL2,
overall costs
I System recovery support by
configuration and connection
data read-back
I Boundary scan support according
to IEEE 1149.1
ATM Adaptation Layer Functions
I Supports up to 256 AAL1 ATM
VCCs
I Supports structured and unstruc-
tured CES modes for eight
E1/T1/J1 links
I Supports Channel Associated
Signaling (CAS)
I Built in SRTS (selectable) and
ACM clock recovery methods
I Supports AAL2 mode features
according to ITU-T I.363.2
I Supports up to 16 AAL2 ATM
VCCs
ATM Layer Functions
I Address Reduction and Header
Translation
I Traffic Management
I Operating and Maintenance
according to ITU-T I.610 (99)
TC Sub-layer Functions
I ATM TC sub-layer (ITU-T G.804)
I Support for G.804 on fractional
E1/T1/J1 (ATMF-FN64)
I Supports up to 8 HDLC channels
for CCS
I IMA8 (ATMF AF-PHY 0086.001)
Physical Characteristics
I Power consumption <2 W
I Power supply 3.3 V I/O,
1.8 V core
I Temperature range
-40°C to +85°C
IWORX
ATM Interworking Controller
PXF 4225E
N e v e r s t o p t h i n k i n g.