LH1540AT Datasheet, PDF (1/5 Pages) Infineon Technologies AG – 1 Form A Solid State Relay

LH1540AT/AAB/AABTR
1 Form A
Solid State Relay
FEATURES
• Current Limit Protection
• l/O Isolation, 5300 V_RMS
• Typical R_ON 20 Ω, max 25 Ω
• Load Voltage 350 V
• Load Current 120 mA
• High Surge Capability
• Linear, AC/DC Operation
• Clean Bounce Free Switching
• Low Power Consumption
• High Reliability Monolithic Receptor
• SMD lead available on tape and reel
• Flammability; UL94,VØ
AGENCY APPROVALS
• UL – File No. E52744
• BSI/BABT Cert. No. 7980
• FIMKO Approval
• CSA – Certification 093751
APPLICATIONS
• General Telecom Switching
– On/off Hook Control
– Ring Delay
– Dial Pulse
– Ground Start
– Ground Fault Protection
• Instrumentation
• Industrial Controls
• See Application Note 56
DESCRIPTION
The LH1540 is robust, ideal for telecom and ground
fault applications. It is a SPST normally open switch (1
Form A) that replaces electromechanical relays in many
applications. It is constructed using a GaAIAs LED for
actuation control and an integrated monolithic die for
the switch output. The die, fabricated in a high-voltage
dielectrically isolated technology, is comprised of a
photodiode array, switch control circuitry and MOSFET
switches. In addition, it employs current-limiting cir-
cuitry which meets FCC 68.302 and other regulatory
voltage surge requirements when overvoltage protec-
tion is provided.
Package Dimensions in Inches (mm)
DIP
S
DC S'
Pin One ID.
6
5
4
S
S'
321
.256 (6.50)
.248 (6.30)
4 56
.343 (8.70)
.335 (8.50)
.039
(1.00)
Min.
4° Typ.
.022 (0.55)
.018 (0.45)
.150 (3.81)
.130 (3.30)
.020 (.051) Min.
.035 (0.90)
.031 (0.80)
.100 (2.54) Typ.
SMD
.343 (8.71)
.335 (8.51)
Pin one I.D.
1
2
3
.300 (7.62)
Typ.
18° Typ.
.014 (.35)
.010 (.25)
.347 (8.82)
.300 (7.62)
.150 (3.81)
.110 (2.79)
.256 (6.50)
.248 (6.30)
.039
(0.99)
min.
4°
.050 (1.27) typ.
.052 (1.33)
.048 (1.22)
.150 (3.81)
.130 (3.30) .0098 (.25)
.0040 (.10)
.100 (2.54)
.040 (1.016)
.020 (0.508)
.395 (10.03)
.375 (9.63)
.300 (7.62)
typ.
3° to 7°
18°
.315 (8.00)
min.
.012 (0.31)
.008 (0.20)
Part Identification
Part Number
LH1540AT
LH1540AAB
LH1540AABTR
Description
6-pin DIP, Thru Hole
6-pin SMD
6-pin SMD, Tape and Reel
 2001 Infineon Technologies Corp. • Optoelectronics Division • San Jose, CA
www.infineon.com/opto • 1-888-Infineon (1-888-463-4636)
3–154
March 23, 2001-12