ITS724G Datasheet, PDF (1/14 Pages) Infineon Technologies AG – Smart High-Side Power Switch For Industrial Applications Four Channels: 4 x 90mΩ

PROFET® ITS 724G
Smart High-Side Power Switch
For Industrial Applications
Four Channels: 4 x 90mΩ
Status Feedback
Product Summary
Package
Operating Voltage
V_bb
5.5...40V
Operating Temperature T_a
-30…+85°C
Active channels one
four parallel
On-state Resistance
R_ON
90mΩ
22.5mΩ
Nominal load current
I_L(NOM)
3.3A
7.3A
Current limitation
I_L(SCr)
12A
12A
PG-DSO-20
General Description
• N channel vertical power MOSFET with charge pump, ground referenced CMOS compatible input and
diagnostic feedback, monolithically integrated in Smart SIPMOS^ technology.
• Providing embedded protective functions
Applications
• µC compatible high-side power switch with diagnostic feedback for 12V and 24V grounded loads in industrial
applications
• All types of resistive, inductive and capacitve loads
• Most suitable for loads with high inrush currents, so as lamps
• Replaces electromechanical relays, fuses and discrete circuits
Basic Functions
• Very low standby current
• CMOS compatible input
• Improved electromagnetic compatibility (EMC)
• Fast demagnetization of inductive loads
• Stable behaviour at undervoltage
• Wide operating voltage range
• Logic ground independent from load ground
Protection Functions
• Short circuit protection
• Overload protection
• Current limitation
• Thermal shutdown
• Overvoltage protection (including load dump) with external
resistor
• Reverse battery protection with external resistor
• Loss of ground and loss of V_bb protection
• Electrostatic discharge protection (ESD)
Diagnostic Function
• Diagnostic feedback with open drain output
• Open load detection in OFF-state
• Feedback of thermal shutdown in ON-state
Block Diagram
Vbb
IN1
ST1/2
IN2
Logic
Channel 1
Channel 2
IN3
ST3/4
IN4
Logic
Channel 3
Channel 4
GND
Load 1
Load 2
Load 3
Load 4
Infineon Technologies AG
1 of 14
2006-Mar-28