|
BSP452-E6327 Datasheet, PDF (1/8 Pages) Infineon Technologies AG – miniPROFET BSP 452 | |||
|
miniPROFET® BSP 452
⢠High-side switch
⢠Short-circuit protection
⢠Input protection
⢠Overtemperature protection with hysteresis
⢠Overload protection
⢠Overvoltage protection
⢠Switching inductive load
⢠Clamp of negative output voltage with inductive loads
⢠Undervoltage shutdown
⢠Maximum current internally limited
⢠Electrostatic discharge (ESD) protection
⢠Reverse battery protection1)
Package: SOT 223
Type
BSP 452
Ordering code
Q67000-S271
SOT-223
1
SOT-223
Application
⢠µC compatible power switch for 12 V DC grounded loads
⢠All types of resistive, inductive and capacitive loads
⢠Replaces electromechanical relays and discrete circuits
General Description
N channel vertical power FET with charge pump, ground referenced CMOS compatible input,monolithically
integrated in Smart SIPMOS technology. Fully protected by embedded protection functions.
Blockdiagramm:
ESD-
Diode
3 IN Rin
Voltage
source
V Logic
Voltage
sensor
Overvoltage
protection
Current
Gate
limit protection
+ Vbb 4
Charge pump
Level shifter
Rectifier
Limit for
unclamped
ind. loads
OUT
1
Temperature
sensor
ESD
Logic
Load
GND
2
Signal GND
miniPROFET
Load GND
1) With resistor RGND=150 ⦠in GND connection, resistor in series with IN connections reverse load current
limited by connected load.
Data Book
1
20.08.96
|
▷ |