BGSF1717MN26 Datasheet, PDF (1/41 Pages) Infineon Technologies AG – Antenna Switch Module with integrated MIPI RFFE Interface

Antenna Switch Module: BGSF1717MN26
Antenna Switch Module with integrated
MIPI RFFE Interface, 2 GSMTX Ports for
multi-mode GSM/EDGE, WCDMA or LTE
Applications and Carrier Aggregation
SAppoliclautiotn iNootenAsN384
About this document
Scope and purpose
This application note describes Infineon’s Antenna Switch Module BGSF1717MN26 as main antenna switch
module for multi-mode GSM/EDGE, WCDMA or LTE Applications and Carrier Aggregation applications.
1. This application notes gives an overview about main purpose of this
SP7T Low Band + SP7T High Band Antenna Switch Module.
2. Multi-mode GSM/EDGE, WCDMA or LTE Applications and Carrier Aggregation are the primary
application of this document.
3. The Printed Circuit Board (PCB) design as well as antenna matching network proposed in this note
provides a customer oriented approach where a single ASM enables multi-mode GSM/EDGE, WCDMA
or LTE and Carrier Aggregation applications
4. Key performance parameters include higher Isolation between input channels (~32dB), integrated
SAW Filter for LB and HB GSM Tx inputs, very low IL of the TX channels (0.5dB), integration of SP7T
LB and SP7T HB in one module and an integrated MIPI RFFE Interface.
1
Revision 1.0, 2015-10-03