I595 Datasheet, PDF (3/3 Pages) ILSI America LLC – Advanced PLL Technology

3.2 mm x 2.5 mm 6 Pads SMD TCXO or TC/VCXO Oscillator
Typical Applications:
I595 / I795 Series
LVPECL
10 uF
0.01
uF
I595 N/C or Ground
I795 Voltage Control
Enable / Disable or
N/C
Vcc N/C
6
5
4
Oscillator
1
2
3
OUTPUT
15 pF
LVPECL
Vcc Vcc
10 uF
0.01
uF
R1 R3
Vcc
Zo = 50?
OUTPUT
Zo = 50?
6
5
4
OUTPUT
10 uF
0.01
uF
Oscillator
R2 R4
I595 N/C or Ground
I795 Voltage Control
1
2
3
Enable / Disable or
N/C
Vcc = +3.3 V R1 and R3 = 127? , R2 and R4 = 825?
Vcc = +2.5 V R1 and R3 = 250? , R2 and R4 = 625?
I595 N/C or Ground
I795 Voltage Control
Enable / Disable or
N/C
LVDS
Vcc
Zo = 50?
Zo = 50?
6
5
4
Oscillator
1
2
3
OUTPUT
R1
OUTPUT
Environmental Specifications:
Thermal Shock
Moisture Resistance
Mechanical Shock
Mechanical Vibration
Resistance to Soldering Heat
Hazardous Substance
Solderability
Terminal Strength
Gross Leak
Fine Leak
Solvent Resistance
Package Information:
MIL-STD-883, Method 1011, Condition A
MIL-STD-883, Method 1004
MIL-STD-883, Method 2002, Condition B
MIL-STD-883, Method 2007, Condition A
J-STD-020C, Table 5-2 Pb-free devices (except 2 cycles max)
Pb-Free / RoHS / Green Compliant
JESD22-B102-D Method 2 (Preconditioning E)
MIL-STD-883, Method 2004, Test Condition D
MIL-STD-883, Method 1014, Condition C
MIL-STD-883, Method 1014, Condition A2, R1=2x10-8 atm cc/s
MIL-STD-202, Method 215
MSL – N.A. (package does not contain plastic, storage life is unlimited under normal room conditions)
Termination = e4 (Au over Ni over W base metallization)
Pb Free Solder Reflow Profile:
Marking:
Line 1: I - Date Code (yww)
Line 2: Frequency
Units are backward compatible with 240ºC reflow process.
PROPRIETARY AND CONFIDENTIAL
THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION, AND SUCH INFORMATION MAY NOT BE DISCLOSED TO OTHERS FOR ANY
PURPOSE NOR USED FOR MANUFACTURING PURPOSES WITHOUT WRITTEN PERMISSION FROM ILSI America.
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 3/28/15_D
Page 3 of 3