ISM61 Datasheet, PDF (1/2 Pages) ILSI America LLC – 9 mm x 14 mm Plastic Package SMD Oscillator, TTL / HC-MOS

9 mm x 14 mm Plastic Package SMD Oscillator, TTL / HC-MOS
Product Features:
Low Jitter, Non-PLL Based Output
CMOS/TTL Compatible Logic Levels
Compatible with Leadfree Processing
Applications:
Fibre Channel
Server & Storage
Sonet /SDH
802.11 / Wifi
T1/E1, T3/E3
System Clock
Frequency
250 KHz to 150.000 MHz
Output Level
HC-MOS
TTL
Duty Cycle
Rise / Fall Time
‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min.
‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min.
Specify 50% ±10% or ±5% See Table in Part Number Guide
5 nS Max. @ Vcc = +3.3 VDC, 10 nS Max. @ Vcc = +5 VDC ***
Output Load
Frequency Stability
Start-up Time
Enable / Disable
Time
Supply Voltage
Current
Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 LSTTL See Table in Part Number
Guide
See Frequency Stability Table (Includes room temperature tolerance and
stability over operating temperature)
10 mS Max.
100 nS Max. N.C. or ≥ 70% Vdd = Enable. ≤ 30% Vdd = Disable.
See Input Voltage Table, tolerance ±5 %
70 mA Max. ***
Operating
Storage
See Operating Temperature Table in Part Number Guide
-55 C to +125 C
Jitter:
RMS(1sigma)
1 MHz-75 MHz
76 MHz-150 MHz
Max Integrated
1 MHz-75 MHz
76 MHz-150 MHz
Max Total Jitter
1 MHz-75 MHz
76 MHz-150 MHz
5 pS RMS (1 sigma) Max. accumulated jitter (20K adjacent periods)
3 pS RMS (1 sigma) Max. accumulated jitter (20K adjacent periods)
1.5 pS RMS (1 sigma -12KHz to 20MHz)
1 pS RMS (1 sigma -12KHz to 20MHz)
50 pS p-p (100K adjacent periods)
30 pS p-p (100K adjacent periods)
ISM61 Series
Part Number Guide
Sample Part Number:
ISM61 - 3251BH - 20.000
Package
Input
Operating
Symmetry
Output
Stability Enable /
Voltage
Temperature
(Duty Cycle)
(in ppm) ^Disable
5 = 5.0 V
1 = 0 C to +70 C
5 = 45 / 55 Max.
1 = 10TTL / 15 pF HC-MOS
**E = 10 H = Enable
ISM61 -
3 = 3.3 V
6 = -10 C to +70 C
6 = 40 / 60 Max.
6 = 30 pF
**D = 15
O = N/C
7 = 3.0 V
3 = -20 C to +70 C
5 = 50 pF HC-MOS (<40 MHz)
**F = 20
2 = 2.7 V
4 = -30 C to +75 C
**A = 25
6 = 2.5 V
2 = -40 C to +85 C
B = 50
1 = 1.8 V*
C = 100
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 4) and GND (pin 2) to minimize power supply noise.
* Not available at all frequencies. ** Not available for all temperature ranges. *** Frequency, supply, and load related parameters.
Frequency
- 20.000 MHz
5/22/12_B
ILSI America Phone: [phone] • Fax: [phone]• e-mail: [e-mail] • www.ilsiamerica.com
Specifications subject to change without notice
Page 1