I605 Datasheet, PDF (1/2 Pages) ILSI America LLC – 5 mm x 7 mm Ceramic Package SMD VCXO, TTL / HC-MOS

5 mm x 7 mm Ceramic Package SMD VCXO, TTL / HC-MOS
I605 Series
Product Features:
Small Surface Mount Package
Based Output for many frequencies
CMOS/TTL Compatible Logic Levels
Compatible with Leadfree Processing
Applications:
SD/HD Video
Wireless Base Stations
Sonet /SDH
VoIP
T1/E1, T3/E3
Frequency
Output Level
HC-MOS
TTL
Duty Cycle
Rise / Fall Time
Output Load
Frequency Stability
Start-up Time
Supply Voltage
Control Voltage
Pull Range
Current
Linearity
Temperature
Operating
Storage
1 MHz to 170.000 MHz
‘0’ = 0.1 Vcc Max., ‘1’ = 0.9 Vcc Min.
‘0’ = 0.4 VDC Max., ‘1’ = 2.4 VDC Min.
50% ±5%
10.0 nS Max.
15pF, Fo < 50 MHz = 10 TTL, Fo > 50 MHz = 5 TTL
50 ppm Max.
10 mS Max.
See Input Voltage Table, tolerance ±5 %
1.65 VDC ±1.5 VDC for 3.3 VDC, 2.5 VDC ±2.0 VDC for 5.0 VDC
See Pullability Table
50 mA Max**
10% Max.
See Operating Temperature Table in Part Number Guide
-55 C to +125 C
Phase Jitter
<3 pS RMS
5.0 0.2
7.0 0.3
2.0 Max.
5.08
Recommended Pad Layout
5.08
4.2
2.0
Bypass =0.01 uF
Pin Connection
1
Control Voltage
2
Enable / Disable
3
Ground
4
Output
5
N.C.
6
Vdd
Dimension Units: mm
Part Number Guide
Package
Operating
Temperature
1 = 0 C to +70 C
6 = -10 C to +70 C
I605 -
3 = -20 C to +70 C
4 = -30 C to +75 C
2 = -40 C to +85 C
Sample Part Number: I605-1BC3H-20.000
Stability
Pullability
(in ppm)
*D = 15
B = 50 PPM Min.
A = 25
C = 100 PPM Min.
B = 50
C = 100
Supply
Voltage
5 = 5.0 VDC
3 = 3.3 VDC
Enable /
Disable
H = Enable
Frequency
- 20.000 MHz
NOTE: A 0.01 µF bypass capacitor is recommended between Vcc (pin 6) and GND (pin 3) to minimize power supply noise.
* Not available at all frequencies. ** Frequency, supply, and load related parameters.
12/10_C
ILSI America Phone: [phone] • Fax: [phone]• e-mail: [e-mail] • www.ilsiamerica.com
Specifications subject to change without notice
Page 1