I428 Datasheet, PDF (1/2 Pages) ILSI America LLC – Very Low Phase Noise Option

Low Phase Noise OCXO
Metal Package, 26 mm x 26 mm
Product Features:
Very Low Phase Noise Option
Low Power Consumption
Voltage Control
High Stability
Applications:
Telecommunications
Data Communications
Instrumentation
Test and Measurement
Frequency
Output Level
Sinewave (Into 50Ω, ±10%)
Supply Voltage
100.000 MHz
+8 dBm Min., +10 typ. dBm, +12 dBm Max.
12.0 Vdc, ±5%
Output Load
50 ohms ±5%
Harmonics (Into 50Ω, ±5%)
-30 dBc Typ.
Spurs
-80 dBc Typ.
Frequency Stability
Frequency Vs Aging
Warm Up
±150.0 ppb (-40°C to +85°C)
±0.5 ppm (1^st year)
±1.25 ppm (10 year)
±0.100ppm (5 minutes @25°C Referenced to 30 Min.)
Initial Accuracy @ 25°C
±0.25 ppm with Vc = +5.00 VDC
Current @ 25  C (Start Up)
4.8 Watts Typ.
Current @ 25  C (Steady State) 1.5 Watts Typ.
Voltage Control
EFC Swing
Pullability
Input Impedance
Linearity (Slope =Positive)
Phase Noise (dBc/Hz)
Operating
Storage
0.0 VDC Min., +5.0 typ., +10.0 VDC Max.
±1.0ppm Min., ±2.0ppm Max.
110K Ω Min.
10% Typ.
Option
A
B
C
10Hz
100Hz
1kHz
10kHz
100kHz
- 90
-120
-152
-165
-170
- 95
-125
-155
-165
-170
-100
-130
-155
-168
-172
-40 C to +85 C
-55 C to +95 C
D
-103
-133
-157
-172
-175
I428 Series
Part Number Guide
Package Phase Noise Option
(see table above)
Sample Part Number: I428D-92AWV-100.000 MHz
Input Voltage
Operating
Temperature
Output
Frequency
Stability
(in ppb)
Voltage
Control
Frequency
I428
(Phase Noise Option) -
9 = +12.0V
2= -40 C to +85 C
A = Sine
W = 150
V = Controlled -100.000 MHz
ILSI America Phone [phone] ● Fax [phone] ●email: [e-mail] ●
www.ilsiamerica.com
Specifications subject to change without notice
Rev: 01/21/16_A
Page 1 of 2