UVG Datasheet, PDF (1/2 Pages) Illinois Capacitor, Inc. – High temperature – Very Low ESR – High ripple current – stable with temperature – High frequency

FEATURES
High temperature – Very Low ESR – High ripple current – stable
with temperature – High frequency
APPLICATIONS
DC-DC converters – Voltage regulators – Decoupling
Operating Temperature Range
Capacitance Tolerance
Surge Voltage
WVDC
SVDC
Dissipation Factor
120 Hz, 20°C
Leakage Current
Low Temperature Stability
Impedance Ratio
(100 kHz)
-55°C/ +20°C
+105°C/ +20°C
Load Life
Damp Heat test
Resistance to Soldering Heat
Ripple Current Multipliers
-55°C to +105°C
+20% at 120 Hz, 20°C
2.5
4
6.3
10
16
20
25
1.15 x rated WVDC
15% MAX
<1.25
2 Minutes
0.2CV or 280uA, whichever is greater
<1.25
2000 hours at 105°C with rated WVDC applied
Capacitance Change
<20% of initial measured value
Dissipation Factor
<150% of maximum specified value
ESR
<150% of maximum specified value
Leakage Current
<100% of maximum specified value
1000 hours at 60°C with rated voltage applied at 90-95% R.H.
Capacitance Change
<20% of initial measured value
Dissipation Factor
<150% of maximum specified value
ESR
<150% of maximum specified value
Leakage Current
<100% of maximum specified value
Capacitors placed on a 230°C hot plate for 75 seconds with their electrode terminations facing
downward will fulfill the following conditions after being cooled to room temperature
Capacitance Change
<20% of initial measured value
Dissipation Factor
<150% of maximum specified value
ESR
<150% of maximum specified value
Leakage Current
<100% of maximum specified value
Frequency (Hz)
120Hz<f<1kHz 1kHz<f<10kHz 10kHz<f<100kHz 100kHz<f<500kHz
0.05
0.3
0.7
1.0
D+0.5
6.3
8
W+0.2
6.6
8.3
H+0.2
6.6
8.3
LL+0.2
2.1
2.8
R+0..15
.65
.95
S+0.2
1.9
3.2