PHB Datasheet, PDF (1/6 Pages) Illinois Capacitor, Inc. – High Current - High voltage – Good Pulse Current rating

FEATURES ^{High Current - High voltage – Good Pulse Current rating}
APPLICATIONS
Resonant Circuits – Switching Power Supplies – Motor
Speed controls – Induction Heaters
Operating Temperature Range
Capacitance Tolerance
Non-Recurrent SVDC
AC voltage (50/60 Hz)
Dissipation Factor (MAX)
25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Self Inductance
Capacitance Drift Factor
Life Expectancy
Failure quota
Damp Heat test
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
-40°C to +100°C
+10% at 1 kHz, 25°C
+5% optional
WVDC 250 330 400 600
700
VAC
400
500
600
800
1000
WVDC 250 330 400 600
700
VAC
160 220 275 350
400
For T>+85°C , The voltage (DC/AC)must be decreased by (1.5/2.5)% per °C
Frequency
(kHz)
C<5uF
5<C<25uF
C>25uF
1
0.05%
0.08%
0.1%
Insulation Resistance
30000 MΩxuF
(not to exceed 30GΩ)
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
100000 Hours @WVDC
Capacitance Change
30000 Hours @ VAC
<3% of initially measured value
300/ Billion component hours
56 days at40°C with 90 to 95%RH, +40°C and no voltage applied
Capacitance Change
<2% of initially measured value
Dissipation Factor
<0.001 at 1kHz and 25°C
Insulation Resistance >50% of maximum specified value
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
-200 ppm/°C, +100ppm/°C
Terminal to Terminal
Terminal to case
160% of rated VDCApplied for 10
3kVAC @ 50/60 Hz applied between
seconds or 150% VAC applied for 2
terminals and case for 60 seconds at
Seconds and 25°C
25°C
Polypropylene
Metallized film
Flame Retardant plastic box with epoxy resin (UL94V-0)
Lead free tinned copper leads