MWS Datasheet, PDF (1/2 Pages) Illinois Capacitor, Inc. – High Voltage

FEATURES
High Voltage
APPLICATIONS
Voltage Multipliers – Medical equipment
Operating Temperature Range
Capacitance Tolerance
Peak, AC voltage (50/60 Hz)
Dissipation Factor (MAX)
25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Load Life
Damp Heat test
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
-40°C to +105°C
+10% at 1 kHz, 25°C
+5% optional
WVDC 2500 4000 6300 10000
VAC 500 750 1000 1200
For T>+85°C , The voltage must be decreased by 1.25% per °C
Frequency (kHz)
C<0.1uF
0.1uF<C<1.0uF
1
0.8%
0.8%
10
1.5%
1.5%
100
3.0%
-
Insulation Resistance
15000 MΩ
2000 Hours, +85C with 125% of rated voltage
Capacitance Change
<5% of initially measured value
Dissipation Factor
<0.00 at 1kHz and 25°C
Insulation Resistance
>50% of maximum specified value
56 days at40°C with 93%RH(+/-2%), +40°C and no voltage applied
Capacitance Change
<5% of initially measured value
Dissipation Factor
<0.005 at 1kHz and 25°C
Insulation Resistance
>50% of maximum specified value
<1 nano-Henry per mm of body length and lead length
<1.0% after 2 years at 40°C
+400 ppm/°C, +200ppm/°C
Terminal to Terminal
160% of VDC applied for 2 Seconds and 25°C
Polyester
Metallized film Internal series connected
Flame Retardant Polyester tape wrap (UL 510) with epoxy resin end fills(UL94V0)
Lead free tinned copper leads
Lead Diameter
D
d
<8
0.6
8<D<22 0.8
>22
1.0