MTB Datasheet, PDF (1/3 Pages) RUBYCON CORPORATION – METALLIZED POLYESTER FILM CAPACITORS

FEATURES
Self Healing – Small Size – Low ESR
APPLICATIONS
General Purpose – Coupling – Bypass – Blocking
Operating Temperature Range
Capacitance Tolerance
Peak, AC voltage (50/60 Hz)
Dissipation Factor (MAX)
25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Load Life
Damp Heat test
Reliability
(1 FIT= 1 failure per billion
components hours)
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
-55°C to +105°C
+10% at 1 kHz, 25°C
+5% optional
WVDC
63
100 160
250 400 630 1000
VAC
40
63
90
160
200 220
400
For T>+85°C , The voltage must be decreased by 1.25% per °C
Frequency (kHz)
C<1uF
C>1uF
1
10
WVDC
<100
>100
<100
>100
0.8%
1.5%
Capacitance
<0.33μF
>0.33μF
<0.33μF
>0.33μF
1.0%
-
Insulation Resistance
3750 MΩ
1250 MΩxμF
30000 MΩxμF
10000 MΩxμF
2000 Hours, +85°C with 125% of rated voltage
Capacitance Change
<5% of initially measured value
Dissipation Factor
<0.005 at 1kHz and 25°C for C<1uF
<0.003 at 1kHz and 25°C for C>1uF
Insulation Resistance
>50% of maximum specified value
1000 Hours, 93%RH(+/-2%), +40°C and no voltage applied
Capacitance Change
Dissipation Factor
Insulation Resistance
<5% of initially measured value
<0.005 at 1kHz and 25°C
>50% of maximum specified value
5 Fit at 50% of rated voltage and +40°C
Capacitance Change
<2% of initially measured value
Dissipation Factor
Insulation Resistance
<0.005 at 10kHz and 25°C for C<1uF
<0.003 at 1kHz and 25°C for C>1uF
>50% of maximum specified value
<1 nano-Henry per mm of body length and lead length
<1.0% after 2 years at 40°C
+400 ppm/°C, +200ppm/°C
Terminal to Terminal
160% of VDC applied for 2 Seconds and 25°C
Polyester
Metallized film
Flame Retardant plastic box (UL94V-1) and epoxy resin (UL94V0)
Lead free tinned copper leads
L MAX
S+1.0
LL
d +0.05
18
15
5+1.0
0.6
26.5
22.5
5+1.0
0.6
32
27.5
5+1.0
0.8
42.5
37.5
30+5.0
1.0