MHBA Datasheet, PDF (1/8 Pages) Illinois Capacitor, Inc. – Small size - High voltage – High Capacitance

FEATURES
Small size - High voltage – High Capacitance
APPLICATIONS
UPS – DC link – AC/DC motor controls – Power inverters
Operating Temperature
Range
Capacitance Tolerance
Surge Voltage
(VDC)
Code
VDC
SVDC
AC Voltage
Code
(VAC)
VAC
Dissipation Factor (MAX)
Tan δ
at 1 kHz and 25°C
RMS Current
Insulation Resistance
Self-Inductance
Long Term Stability
Dielectric Strength
Failure Quota
Life Expectancy
Damp Heat Test
Resistance to soldering
Heat
Solder bath temperature: +260°C
+/- 5°C
Exposure time: 10 seconds +/- 1
second
Construction
Electrodes
Coating
Lead Terminations
A04
370
-40°C to +100°C
Above +85°C applied voltage must be de-rated by 1.5%/2.5%/°C (DC/AC)
+10% at 1 kHz, 25°C
+5% optional
A03 A02 A06 A01
500 600 700 800
470 625 750 875 1050
A04 A03 A02 A06 A01
160 250 330 380 400
C< 5μF 5μF<C<15μF 15μF<C<30μF 30μF<C<60μF C>60μF
.06
.1
.13
.15
.17
See standard part listing, Applied RMS is to be de-rated at temperatures above 85°C. No
RMS current is to be applied when the ambient temperature is>+95°C
30000 MΩxuF
After 1 minute of 100VDC applied between the terminals at 25°C
<1 nano-Henry per mm of lead spacing
Capacitance variation <1% MAX after 2 years
Terminal to Terminal
Terminal to case
160% of VDC applied between the
terminals for 10 Seconds and 25°C
3KVAC at 50/60 Hz applied between the terminals
and case for 60 Seconds and 25°C
300/billion component hours
100000/ 30000 hours (DC/AC)
∆C -3% MAX @ rated voltage
Test Condition
Performance requirements
Temperature= +40°C +2°C
Relative Humidity=93 +2%
Test length= 56 days
Max Capacitance change
DF Change
Max Capacitance
change
DF Change
Insulation resistance
< +2% of initially measured valued
< 0.1% @ 1 kHz
> 50% of minimum specified value
<1% of initially measured value
< .1% at 1kHz
Insulation resistance
>50% of minimum specified value
Metallized Polypropylene film
Vacuum deposited Metal layers
Flame retardant Solvent resistant plastic case with epoxy end fill
Lead free tinned copper leads