682PPS302KG Datasheet, PDF (1/5 Pages) Illinois Capacitor, Inc. – Metallized Polypropylene Film Capacitors for Power Semiconductor Circuits

PPS
Metallized Polypropylene
Film Capacitors for
Power Semiconductor
Circuits
• Snubber Capacitor for Energy Conversion
in Power Semiconductor Circuits.
• High Voltage
• SMPS
• Induction Heaters
• High Current
• High Pulse Current Applications
Operating Temperature Range
Capacitance Tolerance
Rated Voltage
VDC
SVDC
VAC
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
Dielectric Strength
Damp Heat Test
Self inductance
Capacitance drift
Temperature Coefficient
Life Expectancy
Failure rate
Dielectric
Electrodes
Construction
Leads
Coating
700
850
1000
1200
380
450
Freq (kHz)
1
1000
1400
480
-40˚C to +85˚C
+/- 10% at 1kHz, 20˚C
1200
1500
2000
1600
2000
2400
500
575
630
C<1.5µF
.05%
2500
3000
700
C>1.5µF
.07%
3000
3500
750
≥30,000MΩ x µF
Not to exceed 30,000MΩ
200% of rated VDC for 10 seconds at 20°C between leads
3kV at 60 Hz for 60 seconds between leads and case.
56 days at +40°C+/-2°C with 93%+/-2% relative humidity.
Capacitance change
Dissipation Factor
Insulation Resistance
≤2% change from initial value
≤0.001 at 1kHz and 25°C
≥50% of minimum specification
<1nH/mm of body length and lead wire length.
<1.0% up to 40°C after 2 years
-200ppm/˚C +/- 100ppm/˚C
≥30,000 hours @VAC
≥100,000 hours @WVDC at 70°C
300/billion component hours.
Polypropylene
Vacuum deposited metal layers
Extended metallized carrier film, internal series connections.
Tinned copper wire.
Flame retardant polyester tape wrap (UL 510)
with epoxy end fills (UL 94V-0)
®
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com
1