473THB305KE Datasheet, PDF (1/3 Pages) Illinois Capacitor, Inc. – Boxed Metallized Polypropylene film capacitors

FEATURES
Small size – Safety Agency approved – 85°C, 85% RH
operating humidity range
APPLICATIONS
EMI filters – Line bypass – Across the line – Antenna
coupling
Operating Temperature Range
Capacitance Tolerance
AC voltage
(50/60 Hz)
Dissipation Factor
at 1 kHz and 20°C
Insulation Resistance
@20°C (<70% RH)for 1 minute at
100VDC applied
Self Inductance
Dielectric Strength
Humidity test
Capacitance temperature
coefficient
Construction
Electrodes
Coating
Lead terminations
-40°C to +110°C
+10% at 1 kHz, 20°C
CSA
ENEC
CQC
UL
250/310
305
275
Tan δ
250/310
.1% Max
Capacitance Terminal to Terminal
Terminal to Case
<0.33uF
>0.33uF
15000 MΩ
5000 MΩxuF
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
>30000 MΩ at 100VDC
>5000 MΩ at 500VDC
<1 nano-Henry per mm of lead spacing and lead length
Terminal to Terminal
C<.0068uF, 1500 VAC or 2121 VDC applied for 60 Seconds
C>.0068uF, 1000 VAC or 1768 VDC applied for 60 seconds
Cut-off current: 2A ac or 10mAdc
Current limiting resistance: 1Ω/V
Terminal to case
2050VDC applied between the terminals and case for 60 Seconds and 20°C
1000 Hours at 85% RH, 85°C and 240VAC applied.
Capacitance change
<10% of initially measured value
Dissipation Factor change
<1.0% at 1kHz
Insulation resistance change
>50% of initially specified value (T-T)
-200ppm/°C, +100ppm/°C
Metallized Polypropylene film
Vacuum deposited Metal layers
Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0)
Lead free tinned copper leads