226RZS050M_13 Datasheet, PDF (1/3 Pages) Illinois Capacitor, Inc. – +105C High Frequency Radial Lead Aluminum Electrolytic Capacitors

RZS
+105°C High
Frequency Radial
Lead Aluminum
Electrolytic Capacitors
For Switching Power Supplies
FEATURES
I High Ripple Current
I Low Impedance
I Low ESL and ESR
I 100 kHz Operating Frequency Range
I Capacitance Range 22 µF to 2,200 µF
I Voltage Range 6.3 WVDC to 63 WVDC
I Solvent Tolerant End Seals Standard
SPECIFICATIONS
Capacitance Tolerance
± 20% at 120Hz, 20°C
Operating Temperature Range
-55°C to +105°C
Dissipation Factor
120Hz, 20°C
WVDC
tan δ
6.3 10
.2
.15
16 25 35 50 63
.1
.08
.07
.06
.05
Note: For above D.F. specifications, add .02 for every
1,000 µf above 1,000 µf
Impedance Ratio
WVDC
6.3 10
16
25
35
50
63
(Max.) @120Hz
-55°C/20°C ^{2.0 1.5}
1.5
1.5
1.5
1.5
1.5
WVDC
≤ 63 WVDC
Leakage Current
Time
Load Life
Shelf Life
2 minutes
.01 CV or 3 µA
whichever is greater
Capacitance change
Dissipation factor
Leakage current
Capacitance change
Dissipation factor
Leakage current
2,000 hours + 105°C with rated voltage
≤ 20% of initial measured value
≤ 200% of initial specified value
≤ initial specified value
1,000 hours at +105°C with no voltage applied.
≤ 20% initial readings
≤ 250% of initial specified value
≤ 200% of initial specified value
SPECIAL ORDER OPTIONS
(See pages 33 thru 37)
• Special tolerances: ±10% (K), -10% + 30% (Q) • Tape and Reel • Tape Ammo Pack • Cut, Formed, Cut and Formed and Snap In Leads
• ^{Epoxy end seal} • ^{Mylar® Polyester Sleeve}
®
66
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com