223MTB102KE Datasheet, PDF (1/4 Pages) Illinois Capacitor, Inc. – Metallized Polyester Film Capacitors for General Purpose Applications

MTB
• Blocking
• Filtering
• Bypassing
Metallized Polyester Film
Capacitors for General
Purpose Applications
• Coupling
• Decoupling
• General Purpose Applications
Operating Temperature Range
Capacitance Tolerance
VDC
Rated Voltage
VAC
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
(50VDC for VDC<100V)
Dielectric Strength
Self inductance
Capacitance drift
Temperature Coefficient
Reliability
Applied voltage = .5VDC@40°C
Load Life Test
Dielectric
Electrodes
Construction
Leads
Coating
-55˚C to +105˚C
+/- 10% at 1kHz, 20˚C
63
100
160
250
400
1000
40
63
90
160
200
250
For T>85°C The rated voltage must be decreased by 1.25% per °C
Freq (kHz)
C≤ 1µF
C> 1µF
1
0.8%
1.0%
10
1.5%
-
VDC
Capacitance Insulation Resistance
≤100
≤.33µF
3750MΩ
≤100
>.33µF
1250MΩxµF
>100
≤.33µF
30000MΩ
>100
>.33µF
10000MΩxµF
160% of rated WVDC for 2 seconds at 20°C between leads
<1nH/mm of capacitor lead spacing
<1.0% up to 40˚C after 2 years
+400ppm/˚C +/- 200ppm/˚C
5 FIT, 1 FIT=1failure/billion component hours.
Typical capacitance change-3%
2000 hours at 100°C±2°C, 125% of rated voltage
Capacitance Charge
Dissipation Factor
≤5% of initial measured value
≤ .5% at 10kHz for C≤1µF
≤.3% at 1kHz for C>1µF
Insulation Resistance
≥50% of initial specified value
Polyester
Vacuum deposited metal layers
Extended metallized film with internal series connections for
WVDC=1000
Tinned copper leads.
Solvent resistant plastic box (UL 94V-1) with epoxy end fills (UL 94V-0)
®
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com