222PPR202KE Datasheet, PDF (1/4 Pages) Illinois Capacitor, Inc. – Small Size Polypropylene Film Capacitors for High Pulse Current Applications

PPR
Small Size Polypropylene
Film Capacitors for High
Pulse Current Applications
• Snubber Capacitor for Energy Conversion
in Power Semiconductor Circuits.
• SCR Commutation
• TV Deflection Circuits
• SMPS Protection Circuits
• Electronic Ballasts
• High Voltage
• High Current
• High Pulse Current Applications
Operating Temperature Range
Capacitance Tolerance
Rated Voltage
WVDC
VAC
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
Dielectric Strength
Load Life
Self inductance
Capacitance drift
Temperature Coefficient
Reliability
fit=1x10⁹
Failures/component hours.
Applied Voltage=0.5xVDC
Temperature=+40°C±2°C
Dielectric
Electrodes
Construction
Leads
Coating
-55˚C to +105˚C
+/- 10% at 1kHz, 20˚C
630
1000
1600
2000
400
600
650
700
DC: For T>85°C voltage must be rated by 1.25% for every °C above 85°C
AC: For T>75°C voltage must be rated by 1.35% for every °C above 75°C
Freq (kHz)
1
10
100
C≤0.33µF
C≤0.1µF
.03%
.05%
.15%
0.1µF>C≤1µF
.03%
.06%
-
≥100,000MΩ
C>1µF
.04%
-
-
C>0.33µF
≥30,000MΩ x µF
160% of rated VDC for 2 seconds at 20°C between leads
2000 hours at 85°C±2°C with 125% of rated voltage
Capacitance change
≤2% change from initial value
Dissipation Factor
Insulation Resistance
≤0.1% at 10kHz and 25°C for C≤1µF
≤0.1% at 1kHz and 25°C for C>1µF
≥50% of specified value
<1nH/mm of capacitor lead spacing.
<0.5% up to 40°C after 2 years
-200ppm/˚C +/- 100ppm/˚C
≤1FIT
Capacitance change
Dissipation Factor
Insulation Resistance
≤10% change from initial value
>2x initial specified value.
<0.005x initial specified value.
Polypropylene
Vacuum deposited metal layers
Extended double metallized carrier film, internal series
connections and metallized film.
Tinned copper leads.
Solvent resistant plastic box (UL 94V-1) with epoxy end fills (UL 94V-0)
®
192
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com