105MPH100K_13 Datasheet, PDF (1/2 Pages) Illinois Capacitor, Inc. – Axial leaded metallized polypropylene film capacitors

MPH Axial leaded metallized
polypropylene film capacitors
FEATURES
APPLICATIONS
Low ESR - High ripple current – stable with frequency and
temperature
Resonant circuits – Filtering – Audio equipment – SMPS
Operating Temperature Range
Capacitance Tolerance
Non Recurrent Surge Voltage
Dissipation Factor (MAX)
1 kHz, 25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Load Life
Damp Heat test
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
WVDC 100 200
SVDC 200 400
-55°C to +105°C
+10% at 1 kHz, 25°C
+5% optional
400
800
0.1%
100000 MΩxμF
1000 Hours, +85C with 125% of rated voltage
Capacitance Change
<3% of initially measured value
Dissipation Factor
<0.001 at 1kHz and 25°C
Insulation Resistance
>50% of maximum specified value
21 days at 40°C with 90 to 95%RH and no voltage applied
Capacitance Change
<5% of initially measured value
Dissipation Factor
<0.005 at 1kHz and 25°C
Insulation Resistance
>50% of maximum specified value
<1 nano-Henry per mm of body length and lead length
<0.5% after 2 years at 40°C
-200 ppm/°C, +100ppm/°C
Terminal to Terminal
160% of rated VDC applied for 2 Seconds and 25°C
Polypropylene
Metallized film
Flame Retardant Polyester tape wrap (UL 510) with epoxy resin end fills(UL94V0)
Lead free tinned copper leads
Diameter
(D)
18<D
D>18
Lead
diameter
(d)
0.8
1.0