104PHC850KG Datasheet, PDF (1/5 Pages) Illinois Capacitor, Inc. – Metallized Polypropylene Film Capacitors for Switching Circuits

PHC
Metallized Polypropylene
Film Capacitors
for Switching Circuits
• Switching capacitor for industrial controls
• Motor speed control
• SMPS
• High end audio
• Resonant circuits
• Induction heaters
• High frequency electronic ballasts
Operating Temperature Range
Capacitance Tolerance
Rated Voltage
WVDC
SVDC
VAC
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
Peak Current - IPEAK
(Non-repetitive)
Dielectric Strength
Self inductance
Capacitance drift
Temperature Coefficient
Life Expectancy
Capacitance change (typical) -5%
Failure rate
Dielectric
Electrodes
Construction
Leads
Coating
-40˚C to +85˚C
250
400
160
Freq (kHz)
1
330
500
200
C≤5µF
.06%
+/- 10% at 1kHz, 20˚C
400
600
600
800
250
330
5µF<C≤30µF
.1%
700
1000
400
C>30µF
.15%
> 30,000MΩ x µF
not to exceed 30,000MΩ
850
1200
450
IPEAK = 1.5*C*dv/dt Maximum
200% of rated WVDC for 10 seconds at 20°C between leads.
3KV at 60Hz for 60 seconds between leads and case.
<1nH/mm of body length and lead wire length.
<1.0% up to 40˚C after 2 years
-200ppm/˚C +/- 100ppm/˚C
≥30,000 hours @VAC at 70°C
≥100,000 hours @WVDC at 70°C
300/billion component hours
Polypropylene
Vacuum deposited metal layers
Metallized film with internal series connections for VDC = 850VDC
Tinned copper wire leads.
Flame retardant polyester tape wrap (UL 510) with epoxy end fills
(UL94V-0)
®
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com
203