|
104PHB850K2H_13 Datasheet, PDF (1/6 Pages) Illinois Capacitor, Inc. – Switching polypropylene film capacitors | |||
|
PHB
Switching polypropylene film
capacitors
Features
ï· High Current
ï· High dvdt
Applications
ï· Induction Heaters
ï· Resonant Circuit
Specifications
Operating Temperature Range
Capacitance Tolerance
Non-Recurrent SVDC
AC voltage (50/60 Hz)
Dissipation Factor (MAX)
25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Self Inductance
Capacitance Drift Factor
Life Expectancy
Failure quota
Damp Heat test
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
ï· 2, 4, 6 leads
ï· High pulse current ratings
ï· Switching power supplies
ï· Motor speed controls
-40°C to +100°C
+10% at 1 kHz, 25°C
+5% optional
WVDC 250 330 400 600
700
VAC
400
500
600
800
1000
WVDC 250 330 400 600
700
VAC
160 220 275 350
400
For T>+85°C , The voltage (DC/AC)must be decreased by (1.5/2.5)% per °C
Frequency
(kHz)
C<5uF
5<C<25uF
C>25uF
1
0.05%
0.08%
0.1%
Insulation Resistance
30000 Mâ¦xuF
(not to exceed 30Gâ¦)
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
Capacitance Change
100000 Hours @WVDC
30000 Hours @ VAC
<3% of initially measured value
300/ Billion component hours
56 days at40°C with 90 to 95%RH, +40°C and no voltage applied
Capacitance Change
<2% of initially measured value
Dissipation Factor
<0.001 at 1kHz and 25°C
Insulation Resistance >50% of maximum specified value
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
-200 ppm/°C, +100ppm/°C
Terminal to Terminal
160% of rated VDCApplied for 10
seconds or 150% VAC applied for 2
Seconds and 25°C
Terminal to case
3kVAC @ 50/60 Hz applied between
terminals and case for 60 seconds at
25°C
Polypropylene
Metallized film
Flame Retardant plastic box with epoxy resin (UL94V-0)
Lead free tinned copper leads
|
▷ |