104PHB850K2G Datasheet, PDF (1/7 Pages) Illinois Capacitor, Inc. – Metallized Polypropylene Film Capacitors for Switching Circuits 2, 4 or 6 leaded

PHB
Metallized Polypropylene Film
Capacitors for Switching
Circuits 2, 4 or 6 leaded
• Switching capacitor for industrial controls
• SMPS
• Induction heaters
• High end audio
• Motor speed control
• Resonant circuits
• High frequency electronic ballasts
2 leads - standard current carrying capability
4 leads - increased current carrying capability
6 leads - maximum current carrying capability
Operating Temperature
Range
Capacitance Tolerance
VDC
Rated Voltage
SVDC
VAC
Dissipation Factor
(max) at 20˚C.
Insulation Resistance
@20˚C(<70% RH)
for 1 minute at 100VDC
Peak Current - IPEAK
(Non-repetitive)
Dielectric Strength
Self inductance
Capacitance drift
Temperature Coefficient
Life Expectancy
Capacitance change (typical) -5%
Failure rate
Dielectric
Electrodes
Construction
Leads
Coating
250
400
160
Freq (kHz)
1
-40˚C to +85˚C
330
500
200
C≤5µF
.05%
+/- 10% at 1kHz, 20˚C
400
600
600
800
250
330
5µF<C≤30µF
.08%
>30,000MΩ x µF
not to exceed 30,000MΩ
700
1000
400
C>30µF
.1%
850
1200
450
IPEAK = 1.5*C*dv/dt Maximum
200% of rated VDC for 10 seconds at 20°C between leads,
3kV at 60Hz for 60 seconds between leads and case.
<1nH/mm of body length and lead wire length.
<1.0% up to 40˚C after 2 years
-200ppm/˚C +/- 100ppm/˚C
≥ 30000 hours @VAC at 70°C
≥100,000 hours @WVDC at 70°C
300/billion component hours
Polypropylene
Vacuum deposited metal layers
Metallized film with internal series connections for VDC = 850VDC
Tinned copper leads.
Solvent resistant proof plastic box (UL 94V-1)
with epoxy end fills (UL 94V-0)
®
196
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com