103MMR250K Datasheet, PDF (1/2 Pages) Illinois Capacitor, Inc. – Small Size Epoxy Dipped Radial Lead Metallized Polyester Film Capacitors

MMR
• Bypass
• Coupling
Small Size Epoxy Dipped
Radial Lead Metallized
Polyester Film Capacitors
• Filtering
• Blocking
Operating Temperature Range
Capacitance Tolerance
VDC
Rated Voltage
VAC
Dissipation Factor
(max) at 20°C
Insulation Resistance
@20°C(<70% RH) for
1 minute at 100VDC
Load Life Test
Damp Heat Test
Self-inductance
Dielectric
Strength
Capacitance Drift Factor
Temperature
Coefficient
Dielectric
Electrodes
Construction
Leads
Coating
-40°C to +105°C
±10% at 1kHz, 20°C
100
250
400
630
63
150
200
220
For T> +85°C the applied voltage must be decreased by 1.25% per °C
Freq. (kHz)
1
10
Capacitance
≤0.33 µF
>0.33 µF
Capacitance Change
Dissipation factor
1.0%
1.5%
Insulation Resistance
9,000 MΩ
3,000 MΩ x µF
2,000 hours at 125% of rated VDC and at 85°C
≤5% change from initial value.
Dissipation Factor
≤0.005 at 1kHz and 25°C
Insulation
Resistance
Capacitance Change
≥50%of mimimum specification
1000 hours at +40°C±2°C with 93% ±2%relative humidity
≤5% change from initial value.
Dissipation Factor
Insulation Resistance
≤0.005 at 1kHz and 25°C
≥50%of minimum specification
≤1 nH/mm along the capacitor pitch and lead wire length.
160% of rated WVDC for 2 seconds at 20°C between the leads.
≤1.0% up to 40°C after 2 years
+400 ppm/°C, ± 200ppm/°C
Polyester
Vacuum deposited metal layers
Extended metallized carrier film
Tinned copper wire
Flame retardant epoxy sealed resin
(UL 94V-O)
®
162
3757 W. Touhy Ave., Lincolnwood, IL 60712 • [phone] • Fax [phone] • www.illcap.com