|
102PWS202KD Datasheet, PDF (1/3 Pages) Illinois Capacitor, Inc. – Axial leaded polypropylene film with aluminum foil electrodes capacitors for power semiconductors | |||
|
Axial leaded polypropylene film with
PWS aluminum foil electrodes capacitors
for power semiconductors
Features
ï· Self Healing
ï· High current
Applications
ï· Low ESR
ï· High pulse current ratings
ï· Power semiconductor circuits
ï· SRC Commutation
Specifications
ï· Switching power supplies
ï· Deflection circuits
Operating Temperature Range
Capacitance Tolerance
AC voltage (50/60 Hz)
Dissipation Factor (MAX)
25°C
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
Self Inductance
Capacitance Drift Factor
Load Life
Reliability
(0.5xRated Voltage,
40°C)
1 FIT=1 failure/1 billion component
hours
Damp Heat test
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
Dielectric Strength
Dielectric
Construction
Coating
Leads
-55°C to +105°C
+10% at 1 kHz, 25°C
+5% optional
WVDC 630 1000 1500 2000
VAC
300 400 450
500
For T>+85°C , The voltage (DC/AC) must be decreased by 1.5% per °C
Frequency (kHz) C<0.001uF .001<C<0.1uF C>0.1uF
10
-
0.05%
0.1%
100
.01%
-
-
Capacitance
<0.1μF
>0.1μF
Insulation Resistance
100000 Mâ¦
30000 Mâ¦xμF
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
1000 Hours, +85C with 150% of rated voltage
Capacitance Change
<1% of initially measured value
Dissipation Factor
<0.0005 at 10kHz and 25°C for C<0.1uF
<0.001 at 1kHz and 25°C for C>0.1uF
Insulation Resistance
>50% of maximum specified value
1 Fit
Capacitance Change
<10% of initially measured value
Dissipation Factor
<200% of initially specified value
Insulation Resistance
>50% of maximum specified value
56 days at40°C with 90 to 95%RH, +40°C and no voltage applied
Capacitance Change
<5% of initially measured value
Dissipation Factor
<0.005 at 1kHz and 25°C
Insulation Resistance
>50% of maximum specified value
<1 nano-Henry per mm of body length lead length
<0.5% after 2 years at 40°C
-200 ppm/°C, +100ppm/°C
Terminal to Terminal
200% of rated VDC applied for 2 Seconds and 25°C
Polypropylene
Aluminum foil with internal series connection and metalized film
Flame Retardant polyester tape wrap (UL 510) with epoxy resin end fill(UL94V0)
Lead free tinned copper leads
|
▷ |