ILE4264-2_12 Datasheet, PDF (2/7 Pages) IK Semicon Co., Ltd – 5-V/100mA Low Power Low-Drop Fixed-Voltage Regulator with low current consumption

ILE4264-2
Pin Description (for P-SOT223-4 package)
Pin
01
03
02, 04
Symbol
I
Q
GND
Function
Input voltage; block to ground directly with a ceramic capacitor
5-V output voltage; block to ground with a capacitor (CQ ≥10 ㎌, ESR≤4Ω)
Ground
Absolute Maximum Ratings
Parameter
Symbol
Min
Max
Unit
Note
Input voltage
V_I
-42
45
V
Input current
I_I
limited
internally
Ground pin current
I_GND
50
-
mA
Output voltage
V_Q
-0.3
32
V
Output current
Junction temperature
Storage temperature
I_Q
limited
internally
T_J
-40
150
o_C
T_stg
-50
150
o_C
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond those
indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
Operating Range
Parameter
Input voltage
Junction temperature
Thermal Resistances
Symbol
Min
V_I
6
Т_J
-40
Max
28
125
Unit
V
o_C
Parameter
Symbol
Min
Thermal Resistances Junction-case ,
for conventional case P-SOT223-4-1
R_{th jc}
-
Thermal Resistances Junction-ambient,
for conventional case P-SOT223-4-1,
- without heat sink
R_{th ja}
-
* R_{th ja} - Thermal Resistances Junction-ambient
Max
25*
220*
Thermal resistance junction ambient for IC with heat dissipater is calculated by formula:
R_{th ja} = R_{th jc} + R_{th ca}
Rth jc - thermal resistance junction case, ^oC /W.
Application circuit and heat dissipater have to provide T_J  125 ^oС.
Maximum power Ptot, Вт, dissipated by IC for T_A, is calculated by formula:
P_tot = (125 - T_A) / R_{th ja}
125 – maximum permitable operating junction temperature, ^ОС
Unit
o_C/W
o_C/W
(1)
(2)
2012, November, Rev. 04