ILA7052N Datasheet, PDF (2/3 Pages) IK Semicon Co., Ltd – No external components

ILA7052
CHARACTERISTICS Vp = 6 V; RL = 8 Q; f = 1 kHz; Tamb = 25 °C; unless otherwise specified.
SYMBOL
Supply
Vp
ltot
Gv
Po
Vno(rms)
Vno(rms)
fr
SVRR
∆V_5-8
THD
IZiI
Ibias
PARAMETER
Supply voltage range
Total quiscent current
Voltage gain
Output power
Noise output voltage
(RMS value)
Frequency response
Supply voltage ripple rejection
DC output offset voltage
pin 5 to 8
Total harmonic distortion
Input impedance
Input bias current
CONDITIONS MIN.
TYP.
3
6
RL=∞
-
4
38
39
THD = 10% -
1,2
MAX. UNIT
18
V
8
mA
40
dB
-
W
note 1
-
note 2
-
-
note 3
40
Rs = 5 kΩ
-
PO=0.1W
-
-
-
150
300
mV
60
-
mV
20 Hz to
-
Hz
20 kHz
50
-
dB
-
100
mV
0,2
1,0
%
100
-
kΩ
100
300
nA
Notes to the characteristics
1. The unweighted RMS noise output voltage is measured at a bandwidth of 60 Hz to 15 kHz with a source impedance
(Rs) of 5 kΩ.
2. The RMS noise output voltage is measured at a bandwidth of 5 kHz with asource impedance of 0 Ω and a frequency
of 500 kHz. With a practical load (R= 8 Ω; L = 200µH) the noise output current is only 100 nA.
3. Ripple rejection is measured at the output with a source impedance of 0 Q and a frequency between 100 Hz and 10
kHz.
The ripple voltage = 200 mV (RMS value) is applied to the positive supply rail.
Rev. 00