IN74LS07 Datasheet, PDF (1/4 Pages) Integral Corp. – Hex Non-Inverted Buffers with Open- Collector Outputs

TECHNICAL DATA
Hex Non-Inverted Buffers with Open-Collector Outputs ^IN74LS07
These hex buffers feature high-voltage open-collector outputs to
interface with high-level circuits or for driving high-current loads. They are
also characterized for use as buffers for driving TTL inputs. The ’LS07
devices have a rated output voltage of 30 V. The maximum sink current is
40 mA.
This circuit are compatible with most TTL families. Inputs are diode-
clamped to minimize transmission-line effects, which simplifies design.
This device contains hex non inverted buffers with open-collector.
• High Output Voltage 30 V
• High Speed t_PD = 12 ns
• Low Power Dissipation P_D = 13 mW per Gate
ORDERING INFORMATION
IN74LS07N Plastic
IN74LS07D SOIC
T_A = 0° to 70° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
Y=A
PIN 14 =V_CC
PIN 7 = GND
FUNCTION TABLE
Inputs
A
H
L
Output
Y
Z
L
Rev. 01