IN74HCT574A Datasheet, PDF (1/6 Pages) Integral Corp. – Octal 3-State Noninverting D Flip-Flop High-Performance Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State
Noninverting D Flip-Flop
High-Performance Silicon-Gate CMOS
IN74HCT574A
The IN74HCT574A is identical in pinout to the LS/ALS574. This
device may be used as a level converter for interfacing TTL or NMOS
outputs to High-Speed CMOS inputs.
Data meeting the setup time is clocked to the outputs with the rising
edge of the Clock. The Output Enable input does not affect the states of
the flip-flops, but when Output Enable is high, all device outputs are
forced to the high-impedance state; thus, data may be stored even when
the outputs are not enabled.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA
ORDERING INFORMATION
IN74HCT574AN Plastic
IN74HCT574ADW SOIC
T_A = -55° to 125° C for all packages
LOGIC DIAGRAM
PIN ASSIGNMENT
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Output
Enable
L
L
L
Inputs
Clock
L,H,
H
X
X = don’t care
Z = high impedance
Output
D
Q
H
H
L
L
X
no
change
X
Z
Rev. 00