IN74HC623A Datasheet, PDF (1/6 Pages) IK Semicon Co., Ltd – Octal 3-State Noninverting Bus Transceiver High-Performance Silicon-Gate CMOS

TECHNICAL DATA
Octal 3-State Noninverting
Bus Transceiver
High-Performance Silicon-Gate CMOS
IN74HC623A
The IN74HC623A is identical in pinout to the LS/ALS623. The
device inputs are compatible with standard CMOS outputs; with pullup
resistors, they are compatible with LS/ALSTTL outputs.
The IN74HC623A is a 3-state noninverting transceiver that is used for
2-way communication between data buses. Two separate enables are
available. The enable for bus A to B is active-high, the enable for bus B
to A is active-low.
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 2.0 to 6.0 V
• Low Input Current: 1.0 μA
• High Noise Immunity Characteristic of CMOS Devices
ORDERING INFORMATION
IN74HC623AN Plastic
IN74HC623ADW SOIC
T_A = -55° to 125° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Control Inputs
Output Direction
Enable
L
L
L
H
H
L
L
H
Operation
Data Transmitted
from Bus B to
Bus A
Data Transmitted
from Bus A to
Bus B
Buses Isolated
(High Impedance
State)
Rev. 00