IN74ACT623 Datasheet, PDF (1/6 Pages) Integral Corp. – OCTAL 3-STATE NONINVERTING BUS TRANSCEIVER

TECHNICAL DATA
Octal 3-State Noninverting
Bus Transceiver
High-Speed Silicon-Gate CMOS
IN74ACT623
The IN74ACT623 is identical in pinout to the LS/ALS623,
HC/HCT623. The IN74ACT623 may be used as a level converter for
interfacing TTL or NMOS outputs to High Speed CMOS inputs.
The IN74ACT623 is a 3-state noninverting transceiver that is used for
2-way communication between data buses. Two separate enables are
available. The enable for bus A to B is active-high, the enable for bus B
to A is active-low.
• TTL/NMOS Compatible Input Levels
• Outputs Directly Interface to CMOS, NMOS, and TTL
• Operating Voltage Range: 4.5 to 5.5 V
• Low Input Current: 1.0 µA; 0.1 µA @ 25°C
• Outputs Source/Sink 24 mA
ORDERING INFORMATION
IN74ACT623N Plastic
IN74ACT623DW SOIC
T_A = -40° to 85° C for all packages
PIN ASSIGNMENT
LOGIC DIAGRAM
PIN 20=V_CC
PIN 10 = GND
FUNCTION TABLE
Control Inputs
Output Direction
Enable
L
L
H
H
H
L
L
H
Operation
Data Transmitted
from Bus B to
Bus A
Data Transmitted
from Bus A to
Bus B
Buses Isolated
(High Impedance
State)
Rev. 00