IN1363 Datasheet, PDF (1/33 Pages) IK Semicon Co., Ltd – Programmed orthogonal output signal

TECHNICAL DATA
CMOS LIS of Real Time Watch with Serial Interface
IN1363
FEATURES
 Count of seconds, minutes, hours, week days, date, months and
years with consideration of leap years (until 2100);
 400 kHz, double wire serial interface;
 Programmed orthogonal output signal;
 Function programming of alarm, timer and interruption;
 Automatic determination of the supply voltage drop;
 Consumption current of less, than 450 nA with supply of 2V with the
operating oscillator;
 Operating temperature range: -40С – 85С.
SOP- 8
MSOP-8
ТА = - 40 ... + 85 С
for all packages
ORDERING INFORMATION
Device
IN1363DT
IN1363D
IN1363MDT
IN1363MD
Operating
Temperature Range
Т_А = - 40 ... + 85 С
Package
SOP-8
SOP-8
MSOP-8
MSOP-8
Shipping
Tape & Reel
Tube
Tape & Reel
Tube
DESCRIPTION
Microcircuit IN1363 is essentially the complete binary-decimal digital watch with calendar, alarm, timer and
possesses low power consumption. Addresses and data are transferred in series via the double wire bi-
directional bus. The microcircuit is intended for count of real time in hours, minutes and seconds, count of
week days, date, month and year. The last day of the month is automatically adjusted for the months with
fewer, than 31 days, including correction for the leap year. The watch functions in the 24 hour mode. The
microcircuit IN1363 has the built-in power control circuit, which determines the power level < 1V and forms
the bit, signaling, that information about the real time may not be correct.
1
Aug 2012, ver.05