ILX3485 Datasheet, PDF (1/6 Pages) IK Semicon Co., Ltd – Low-Power, Slew-Rate-Limited RS-485/RS-422 Transceivers

TECHNICAL DATA
Low-Power, Slew-Rate-Limited RS-485/RS-422 ^ILX3485
Transceivers
General Description
The ILX3485 is low-power transceivers for RS-485-3.3 and
RS- 422-3.3 communication. IC contains one driver and one
receiver. The driver slew rates of the ILX3485 is not limited,
allowing them to transmit up to 2.5Mbps.
These transceivers draw between 120µA and 500µA of supply
current when unloaded or fully loaded with disabled drivers. All
parts operate from a single 3.3V supply. Drivers are short-circuit
current limited and are protected against excessive power dissipation
by thermal shutdown circuitry that places the driver outputs into a
high-impedance state.The receiver input has a fail-safe feature that
guarantees a logic-high output if the input is open circuit.
ORDERING INFORMATION
ILX3485N Plastic
ILX3485D SOIC
Features
§ Low Quiescent Current: 300µA
§ -7V to +12V Common-Mode Input Voltage Range
§ Three-State Outputs
§ 30ns Propagation Delays, 5ns Skew
§ Full-Duplex and Half-Duplex Versions Available
§ Operate from a Single 3.3V Supply
§ Allows up to 32 Transceivers on the Bus
§ Data rate: 2,5 Mbps
§ Current-Limiting and Thermal Shutdown for Driver Overload Protection
§ The transmitter outputs and receiver inputs are protected to ±15kV Air ESD.
Rev. 01