|
IL34118 Datasheet, PDF (1/14 Pages) Integral Corp. – Voice Switched Speakerphone Circuit | |||
|
TECHNICAL DATA
Voice Switched Speakerphone Circuit
IL34118
The IL34118 Voice Switched Speakerphone Circuit incorporates the
necessary amplifiers, attenuators, level detectors, and control algorithm to form
the heart of a high quality hands-free speakerphone system. Included are a
microphone amplifier with adjustable gain and MUTE control, Transmit and
Receive attenuators which operate in a complementary manner, level detectors
at both input and output of both attenuators, and background noise monitors
for both the transmit and receive channels. A Dial Tone Detector prevents the
dial tone from being attenuated by the Receive background noise monitor
circuit. Also included are two line driver amplifiers which can be used to form
a hybrid network in conjunction with an external coupling transformer. A high
pass filter can be used to filter out 60 Hz noise in the receive channel, or for
other filtering functions. A Chip Disable pin permits powering down the entire
circuit to conserve power on long loops where loop current is at a minimum.
The IL34118 may be operated from a power supply, or it can be powered from
the telephone line, requiring typically 5.0 mA. The IL34118 can be interfaced
directly to Tip and Ring (through a coupling transformer) for stand-alone
operation, or it can be used in conjunction with a handset speech network and
or other features of a feature phone.
ORDERING INFORMATION
Operating
Device
Temperature
Range
IL34118N
IL34118DW
IL34118DWT
TA = -20ï° to 70ï° C
Package
DIP28
SOP28
SOP28
Packing
Tube
Tube
Tape & Reel
Futures
ï· Improved Attenuator Gain Range: 52 dB Between Transmit and Receive
ï· Low Voltage Operation for Line-Powered Applications (3.0-6.5 V)
ï· 4 Point Signal Sensing for Improved Sensitivity
ï· Background Noise Monitors for Both Transmit and Receive Paths
ï· Microphone Amplifier Gain Set by External Resistors - Mute Function
Included
ï· Chip Disable for Active Standby Operation
ï· On Board Filter Pinned-Out for User Defined Function
ï· Dial Tone Detector to Inhibit Receive Idle Mode During Dial Tone
Presence
IL34118N Plastic
IL34118DW/DWT SOIC
PIN ASSIGNMENT
2013, January, Ver. 02
|
▷ |