IL311_11 Datasheet, PDF (1/3 Pages) IK Semicon Co., Ltd – High Performance Voltage Comparators

TECHNI CAL DATA
High Performance Voltage Comparators
LOGIC DIAGRAM
IL311
Input polarity is reversed when GND pin is used as an output.
ORDERING INFORMATION
IL311N Plastic
IL311D SOIC
T_A = -45°C to 85°C for all
packages
PIN ASSIGNMENT
MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
V_CC + V_EE Total Supply Voltage
36
V
V_O - V_EE
Output to Negative Supply Voltage
40
V
V_EE
Ground to Negative Supply Voltage
30
V
V_ID
Input Differential Voltage
± 30
V
V_IN
Input Voltage (Note)
± 15
V
-
P_D
1/θ_JA
Voltage at Strobe Pin
Power Dissipation and Thermal Characteristics
Plastic Dual In-Line Packages
Derate above T_A =+25°C
V_CC to V_CC - 5
625
5.0
V
mW
mW/°C
T_J(max)
Operating Junction Temperature
+150
°C
Tstg
Storage Temperature Range
-60 to +150
°C
Note: This rating applies for ±15 volt supplies. The positive input voltage limit is 30 volts above the negative
supply. The negative input voltage limit is equal to the negative supply voltage or 30 volts below the
positive supply, whichever is less.
* Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the
device.
These are stress ratings only and functional operation of the device at these or any other conditions beyond
those indicated under “recommended operating conditions” is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
2011, January, ver.01