IDT5V5206 Datasheet, PDF (9/18 Pages) Integrated Device Technology – Single Channel Type-2 M-LVDS to LVTTL Transceiver

IDT5V5206
2 PIN DESCRIPTION
Table-1 Pin Description
Name Pin No.
I/O
Type
DR_EN
3
RE_EN
2
I
Pull-down
I
Pull-up
LVTTL
LVTTL
IN
4
I
OUT
1
O
M_A
6
M_B
7
VDD
8
GND
5
I/O
Power
Ground
LVTTL
LVTTL
M-LVDS
-
-
Single Channel Type-2 M-LVDS to LVTTL Transceiver
Description
Global Signal
DR_EN: M-LVDS Driver Enable
This pin controls the M-LVDS driver: high for enable and low for disable.
RE_EN: Type-2 M-LVDS Receiver and LVTTL Driver Enable
This pin controls the Type-2 M-LVDS receiver and LVTTL driver: high for disable and low for
enable. Note that the LVTTL driver is in high impedance state when disabled.
LVTTL Interface
IN: LVTTL Input
An up to 166 MHz LVTTL signal is input on this pin.
OUT: LVTTL Output
This pin outputs an up to 166 MHz signal.
M-LVDS Interface
M_A/M_B: Positive/Negative M-LVDS Data Bus Interface
This pair of pins are connected to the M-LVDS data bus.
Power Supply and Ground
3.3 V Power Supply
Ground
Pin Description
9
May 18, 2006