83948I_16 Datasheet, PDF (8/13 Pages) Integrated Device Technology – Low Skew, 1-to-12 Differential-to- LVCMOS/LVTTL Fanout Buffer

83948I Datasheet
Differential Clock Input Interface
The CLK /nCLK accepts LVDS, LVPECL, LVHSTL, SSTL, HCSL
and other differential signals. Both signals must meet the V_PP and
V_CMR input requirements. Figures 2A to 2F show interface
examples for the HiPerClockS CLK/nCLK input driven by the most
common driver types. The input interfaces suggested here are
examples only. Please consult with the vendor of the driver
component to confirm the driver termination requirements. For
example, in Figure 2A, the input termination applies for IDT
HiPerClockS open emitter LVHSTL drivers. If you are using an
LVHSTL driver from another vendor, use their termination
recommendation.
1.8V
Zo = 50Ω
Zo = 50Ω
LVHSTL
IDT
LVHSTL Driver
3.3V
CLK
R1
R2
50Ω
50Ω
nCLK
Differential
Input
Figure 2A. HiPerClockS CLK/nCLK Input
Driven by an IDT Open Emitter
HiPerClockS LVHSTL Driver
Figure 2B. HiPerClockS CLK/nCLK Input
Driven by a 3.3V LVPECL Driver
Figure 2C. HiPerClockS CLK/nCLK Input
Driven by a 3.3V LVPECL Driver
3.3V
*R3
*R4
HCSL
3.3V
CLK
nCLK
Differential
Input
Figure 2D. HiPerClockS CLK/nCLK Input
Driven by a 3.3V LVDS Driver
2.5V
SSTL
Zo = 60Ω
Zo = 60Ω
2.5V
R3
120Ω
R4
120Ω
3.3V
CLK
R1
120Ω
R2
120Ω
nCLK
Differential
Input
Figure 2E. HiPerClockS CLK/nCLK Input
Driven by a 3.3V HCSL Driver
Figure 2F. HiPerClockS CLK/nCLK Input
Driven by a 2.5V SSTL Driver
©2016 Integrated Device Technology, Inc
8
May 19, 2016