IDT82V2616 Datasheet, PDF (77/99 Pages) Integrated Device Technology – INVERSE MULTIPLEXING FOR ATM

IDT82V2616
Table-56 ConfigSlaveFrame Command (Encoding: 02H)
Command Parameters
1
line interface Work Mode
2
line interface clock mode
Inverse Multiplexing for ATM
Byte Sequence
1
2
Command Reply
Parameter Name
line interface
Work Mode
line interface
clock mode
Default
0FH
Mode0~mode15
Description
Line interface Work Mode for all the links.
0H 0: Common Clock Mode;
1: Independent Clock Mode
Line interface clock input mode for all the links. Line interface mode7~mode10 and mode14~mode15
cannot be used in Independent Clock Mode.
1
Ack
Byte Sequence
1
Reply Name
Ack
Description
0: OK;
1: Invalid parameter (length of the command is incorrect).
Others: Internal error. The chip should be reset.
IMAOS16_SLAVE
69
December 8, 2003