8SLVP2102I Datasheet, PDF (6/23 Pages) Integrated Device Technology – Low Phase Noise, Dual 1-to-2, 3.3V, 2.5V LVPECL Output Fanout Buffer

IDT8SLVP2102I Data Sheet
LOW PHASE NOISE, DUAL 1-TO-2, 3.3V, 2.5V LVPECL OUTPUT FANOUT BUFFER
Table 4B. AC Addtive Phase Jitter Electrical Characteristics, V_CC = 3.3V ± 5%, V_EE = 0V, T_A = -40°C to 85°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 1kHz – 40MHz
79
95
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 10kHz – 20MHz
45
61
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 12kHz – 20MHz
45
61
Buffer Additive
f_REF = 156.25MHz Square Wave, V_PP = 1V,
Integration Range: 1kHz – 40MHz
t_JIT
Phase Jitter, RMS;
refer to Additive
f_REF = 156.25MHz Square Wave, V_PP = 1V,
Integration Range: 10kHz – 20MHz
Phase Jitter Section _{fREF = 156.25MHz Square Wave, VPP = 1V,}
Integration Range: 12kHz – 20MHz
43
49
32
36
32
36
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 1kHz – 40MHz
43
50
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 10kHz – 20MHz
31
35
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 12kHz – 20MHz
31
35
Units
fs
fs
fs
fs
fs
fs
fs
fs
fs
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
Table 4C. AC Addtive Phase Jitter Electrical Characteristics, V_CC = 2.5V ± 5%, V_EE = 0V, T_A = -40°C to 85°C
Symbol Parameter
Test Conditions
Minimum
Typical
Maximum
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 1kHz – 40MHz
82
95
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 10kHz – 20MHz
50
66
f_REF = 122.88MHz Square Wave, V_PP = 1V,
Integration Range: 12kHz – 20MHz
50
66
Buffer Additive
f_REF = 156.25MHz Square Wave, V_PP = 1V,
Integration Range: 1kHz – 40MHz
t_JIT
Phase Jitter, RMS;
refer to Additive
f_REF = 156.25MHz Square Wave, V_PP = 1V,
Integration Range: 10kHz – 20MHz
Phase Jitter Section _{fREF = 156.25MHz Square Wave, VPP = 1V,}
Integration Range: 12kHz – 20MHz
51
68
37
48
37
48
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 1kHz – 40MHz
48
54
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 10kHz – 20MHz
34
38
f_REF = 156.25MHz Square Wave, V_PP = 0.5V,
Integration Range: 12kHz – 20MHz
34
38
Units
fs
fs
fs
fs
fs
fs
fs
fs
fs
NOTE: Electrical parameters are guaranteed over the specified ambient operating temperature range, which is established when the device is
mounted in a test socket with maintained transverse airflow greater than 500 lfpm. The device will meet specifications after thermal equilibrium
has been reached under these conditions.
IDT8SLVP2102ANLGI REVISION B FEBRUARY 26, 2014
6
©2014 Integrated Device Technology, Inc.