TSI721 Datasheet, PDF (56/68 Pages) Integrated Device Technology – This document uses the following conventions

3. Electrical Characteristics > AC Timing Specifications
Table 29: Level II Short Run Receiver Electrical Input Specifications (Continued)
Characteristic
Input common mode voltage^1,2
Wander divider
Symbol
R_Vrcm
n
Reference
R_Vtt
floating^3,4
R_Vtt =
1.2V
Nominal
R_Vtt =
1.0V
Nominal
R_Vtt
=0.8V
Nominal
Section
8.4.5, 8.4.6
Minimal
-0.05
720
535
475
-
Typical
-
Maximum
1.85
R_Vtt - 10
R_Vtt + 125
R_Vtt + 105
10
-
Units
V
mV
mV
mV
-
1. DC Coupling compliance is optional. For Vcm definition, see Figure 6.
2. Receiver is required to implement at least one of the specified nominal R_Vtt values, and usually implements only one of
these values. Receiver is only required to meet R_Vrcm parameter values that correspond to R_Vtt values supported.
3. Input common mode voltage for AC-coupled or floating load input with min. T_Vdiff.
4. For floating load, input resistance must be > 1K Ohm.
Tsi721 Datasheet
Formal Status
Integrated Device Technology
56
May 5, 2014
This document is confidential and is subject to an NDA.