IDT82V2604 Datasheet, PDF (52/97 Pages) Integrated Device Technology – INVERSE MULTIPLEXING FOR ATM IDT82V2604

IDT82V2604
Inverse Multiplexing for ATM
Table-34 DeleteGrp Command (Encoding: 13H)
This command is used to delete the specified group and all its links at once. Upon the issue of this command, the GSM will go back to Not Configured state and all the
links will transition to Not In Group state.
Command Parameters
1
Group ID
Byte Sequence
1
Command Reply
Parameter Name
Group ID
Default
NA
The physical group ID (0~3).
The physical group to be deleted.
1
Ack
Description
Byte Sequence
1
Reply Name
Ack
Description
0: Acknowledge;
1: Invalid parameter (length of the command is incorrect or Group ID is over 3);
Others: Internal error. The chip should be reset.
PROGRAMMING INFORMATION for IMAOS04
44
December 8, 2003