ICS83054I Datasheet, PDF (5/14 Pages) Integrated Circuit Systems – 4 : 1, SINGLE-ENDED MULTIPLEXER

ICS83054I
4:1, SINGLE-ENDED MULTIPLEXER
TABLE
5B.
AC
CHARACTERISTICS,
V
DD
=
3.3V
±
5%,
V
DDO
=
2.5V
±
5%,
TA
=
-40°C
TO
85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum
f_MAX
tp_LH
tp_HL
tsk(i)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
250
2.5
2.8
3.1
2.6
2.8
3.0
45
150
tjit
tsk(pp)
Buffer Additive Phase Jitter, RMS;
refer to Additive Phase Jitter Section;
NOTE 3
Part-to-Part Skew; NOTE 2, 4
155.52MHz,
(12kHz to 20MHz)
0.14
780
t_R / t_F
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
50
500
45
55
MUX_ISOL MUX Isolation
@ 100MHz
45
NOTE 1: Measured from V_DD/2 of the input to V_DDO/2 of the output.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V_DDO/2.
Units
MHz
ns
ns
ps
ps
ps
ps
%
dB
TABLE
5C.
AC
CHARACTERISTICS,
V
DD
=
3.3V
±
5%,
V
DDO
=
1.8V
±
5%,
TA
=
-40°C
TO
85°C
Symbol Parameter
Test Conditions
Minimum Typical Maximum Units
f
MAX
tp_LH
tp_HL
tsk(i)
tjit
tsk(pp)
Output Frequency
Propagation Delay, Low to High; NOTE 1
Propagation Delay, High to Low; NOTE 1
Input Skew; NOTE 2
Buffer Additive Phase Jitter, RMS;
refer to Additive Phase Jitter Section;
NOTE 3
Part-to-Part Skew; NOTE 2, 4
155.52MHz,
(12kHz to 20MHz)
250
MHz
2.7
3.2
3.8
ns
2.8
3.3
3.8
ns
50
150
ps
0.16
ps
780
ps
t_R / t_F
odc
Output Rise/Fall Time
Output Duty Cycle
20% to 80%
100
45
700
ps
55
%
MUX_ISOL MUX Isolation
@ 100MHz
45
dB
NOTE 1: Measured from V_DD/2 of the input to V_DDO/2 of the output.
NOTE 2: This parameter is defined in accordance with JEDEC Standard 65.
NOTE 3: Driving only one input clock.
NOTE 4: Defined as skew between outputs on different devices operating a the same supply voltages and
with equal load conditions. Using the same type of input on each device, the output is measured at V_DDO/2.
IDT^™ / ICS^™ 4:1, SINGLE-ENDED MULTIPLEXER
5
ICS83054AGI REV. C MARCH 7, 2008