F1102NBGI Datasheet, PDF (4/26 Pages) Integrated Device Technology – RF to IF Dual Downconverting Mixer

DATASHEET
RF to IF Dual Downconverting Mixer
IDTF1102 SPECIFICATION (CONTINUED)
400 – 1000 MHz F1102NBGI
Parameter
NF STD Mode
NF LC Mode
NF w/Blocker
Output IP3 –
Narrowband
Output IP3 –
Wideband
Output IP3 –
LC_MODE
2RF – 2LO rejection
1 dB Compression
1 dB Compression -
LC_MODE
Gain Comp. w/blocker
Spur: 5RF X -4LO
Channel Isolation
LO to IF leakage
RF to IF leakage
LO to RF leakage
Comment
• LCMODE = VIH
• EVkit BOM = STD Mode
• FIF = 200 MHz (High Side Inj.)
• LCMODE = GND
• EVkit BOM = LC Mode
• FIF = 200 MHz (High Side Inj.)
-100 MHz offset blocker
PIN = +10 dBm
FIF = 200 MHz
PIN = -10 dBm per tone
800 KHz Tone Separation
FIF = 200 MHz (High Side Inj.)
FRF = 850 MHz
PIN = -10 dBm per tone
15 MHz Tone Separation
FIF = 200 MHz (High Side Inj.)
PIN = -10 dBm per tone
FIF = 200 MHz (High Side Inj.)
800 KHz Tone Separation
LCMODE = GND
FRF = 915 MHz
PRF = -10 dBm
Frequency = FRF + ½ FIF
Input referred
Input referred
LCMODE = GND
Blocker unmodulated tone
PIN = +8 dBm, 20 MHz offset
Signal Pin Tone = -20 dBm
Measure ∆G of signal
FLO = 1087.5 MHz
FIF = 190 MHz (High Side Inj.)
Desired FRF = 897.5 MHz
Spur Freq = 908 MHz
Pin = +5 dBm
STD Mode
IF_B Pout vs. IF_A w/ RF_A input
Pin = -10 dBm
Symbol min typ max units
NF_STD
9.5
dB
NF_LC
9.3
dB
NF_BLK
21.7
dB
IP3_O1
39²
43
dBm
IP3_O2
42
dBm
IP3_O3
33
36
2x2
-78
P1dB_I1
11.9
12.5
P1dB_I2
9.0
10.2
∆G_AC
0.15
dBm
dBc
dBm
dBm
dB
SPUR₁
-97
-89
dBc
ISO_C
45
51
dB
ISO_LI
-22
-15
dBm
ISO_RI
-26
-20
dBm
ISO_LR
-40
dBm
Notes:
1 – Items in min/max columns in bold italics are Guaranteed by Test
2 – All other Items in min/max columns are Guaranteed by Design Characterization
3 – Normal RF range is 698 – 915 MHz. See Page 25 for modifications for 400 – 500 MHz operation
IDT Zero-Distortion^TM Mixer
4
RevO, August 2012