STAC9200 Datasheet, PDF (20/126 Pages) Integrated Device Technology – 2-CHANNEL HIGH DEFINITION AUDIO CODEC

STAC9200/9200D
2-CHANNEL HIGH DEFINITION AUDIO CODEC
PC AUDIO
3. EXTENDED FEATURE EXPLANATION
3.1.
SPDIF Input
SPDIF IN can run at 44.1 KHz, 48 KHz and 96 KHz, and has internal Jack Sensing.
A sophisticated digital PLL allows automatic rate detection and accurate data recovery. The ability to
directly accept consumer SPDIF voltage levels eliminates the need for costly external receiver ICs.
Advanced features such as record slot select and SPDIF_IN routing to the DAC allows for simulta-
neous record and play.
3.2.
SPDIF Output
SPDIF Output can run at 44.1 KHz, 48 KHz, and 96 KHz at bit rates up to 24 bits, as defined in the
Intel High Definition Audio Specification. This insures compatibility with all consumer audio gear and
allows for convenient integration into home theater systems and multi-media centers.
3.3.
Universal Jacks^TM
IDT’s Universal Jacks^TM technology allows for the greatest flexibility in board design and implemen-
tation.
For the STAC9200/9200D the Universal Jacks^TM capabilities are as follows
• All of the STAC9200/9200D ports support:
• Line Out
• Line In
• Mic with 0/10/20/30/40 dB Mic Boost
• Ports A and D also support
• Headphone Out¹
1_{Headphone capabilities are available on pins 39/41 and 35/36, but one should not put headphone}
loads on both sets of pins at the same time.
Note: On the STAC9200/9200D only one function can be selected at a time, you cannot have an
input and output at the same time on the same set of pins. This function can be changed at any
time.
3.4. Audio Jack Presence Detect
Sense_A pin is used to detect the presence of plugs in ports A, B, C, and D. Refer to the reference
design for port detect circuitry. Select the precision of the resistors used as follows:
AVDD Nominal Voltage
(+- 5%)
5V
4.5V
4V
3.3V
Resistor Tolerance
(If Port D is used)
1%
1%
0.50%
0.10%
Resistor Tolerance
(If Port D is not used)
1%
1%
1%
1%
Includes pull-up resistors on Sense A and series resistors between jack switch and Sense A.
IDT™ 2-CHANNEL HIGH DEFINITION AUDIO CODEC
20
IDT CONFIDENTIAL
STAC9200/9200D
V 1.4 12/06